STERN GUN POLYURETHANE FOAM is multi-purpose, with extra formula that cures with moisture in 2 - 4 hours.
is the filling break.
Areas of Use: Fixing doors, window frames and similar joinery; filling the gaps, electricity
installations, insulation of hot and cold water pipes; It is used to close gaps, holes and cracks.
Technical Properties: After 2 to 4 hours of hardening, excess parts can be shaved, sanded and painted. silicone, teflon,
It can stick to all kinds of construction materials except polyethylene and polypropylene. All kinds of weather conditions, sea water, steam and
It is moisture resistant. Can be sanded, painted, difficult to ignite.
Usage: 1. Shake the tube vigorously for 30 seconds. 2. Insert the tube by turning the gun. 3. The area to be applied
Remove dirt, oil and dust and moisten it with water. (Especially the moistening of the ground and the squeezed foam
It is important for acceleration and efficient results.) 4.Do not use by turning the tube upside down. 5.In subsequent use, the gun and
the valve should be cleaned of dried foam. o. The froth that gets on unwanted places is cleaned with STERN FOAM CLEANER.
7. Since the volume of the foam will increase, it should be filled in an economical way.
Storage: It should be stored in a dry and cool place at -5°C / 30°C.