Brand - FAB

ABOUT THE PRODUCT:

"FAB STONE LACK" is a glossy varnish intended for decorative and protective work on various external and internal facades - natural and artificial stone, brick, concrete, baked clay tiles, paving slabs, curbs and various other mineral surfaces. INGREDIENTS: Acrylic copolymer, solvent, special additives.

FEATURES:

"Wet" creates an image of a stone. Preserves the natural beauty of the surface Resistant to temperature fluctuations, weather conditions, water, ultraviolet rays, detergents, as well as industrial and automotive oils. Protects surface from water

APPLICATION:

The surface to be applied must be dry and free from dust, dirt, resin and oil. Mix the varnish well before use. Apply by brush, roller or spray. After finishing work, the tools should be washed immediately with FAB CELLULOZIC TINER (161) before drying.

INVESTIGATION:

The varnish is ready for use and does not require thinning.

DRYING TIME:

The optimum drying temperature for each coat of varnish is (23 ± 2) ° С, relative humidity is 50%. Drying time for each layer is 15-30 minutes, depending on weather and physical conditions.

COST:

The amount of varnish consumption per coat is from 50 ml / m² to 100 ml / m², depending on the type of surface and the method of application.

NOTE:

ATTENTION! Do not use solvents (white alcohol), solvents or other similar solvents.

DEADLINE:

Within 18 months from the date of manufacture in a tightly closed container.

SECURITY MEASURES:

Keep in a tightly closed production container, protected from moisture and direct sunlight, away from food, out of reach of children. Use rubber gloves to protect your hands. In case of contact with eyes, seek medical advice immediately. Protect from fire!