Brand - FAB

ABOUT THE PRODUCT:

Nitrocellulose-based, air-drying, glossy finish.

FEATURES:

It is a last coat of paint that adheres very well to the applied surfaces, is resistant to physical and chemical influences and does not fade.

APPLICATION:

Can be used with confidence in the furniture industry, metal and wooden surfaces. New metal surfaces to which FAB CELLULOZIC GLASS PAINT (158) will be applied must be primed with FAB SYNTHETIC ANTIPAS (140) or FAB CELLULOZIC ASTAR after cleaning from any dirt, rust and oil. It is important to apply FAB CELLULOZIC FILLED VERNIC (157) to obtain a smooth surface after light summation on wooden surfaces. After light sumbatalama, FAB CELLULOZIC BRIGHT PAINT (158) is dissolved in a 1: 1 ratio with FAB CELLULOZIC TINER (161) until homogeneous and shot with a pistol in the form of 2-3 layers at intervals of 20-30 minutes. Immediately after use, the instruments should be cleaned with FAB CELLULOSIC TINER (161).

INVESTIGATION:

Dilute with FAB CELLULOSIC TINER (161) in a 1: 1 ratio.

DRYING TIME:

(25 ° C / 65% relative humidity): Tactile drying: 30-40 minutes.

INTELLIGENCE RATE:

<23 c="" p="">

COST:

If applied in a single layer in such a way as to create a dry layer of 30-35 microns, an area of ​​10-12 m² is painted with 1 liter of FAB CELLULOZIC BRIGHT PAINT (158).